Facebook pixel

Lining Systems – Capping

Home > Solutions > Lining Systems – Capping

Lining Systems – Capping

Image

The capping or surface barrier system is an important part of the process when sealing (or capping) a landfill, contaminated mine or agricultural site. It is usually integrated within a more general design for “naturalisation” of the site and its rehabilitation into the existing landscape. This is especially important in abandoned mine works, or historic landfills which were closed prior to more rigorous legislation. 


The purpose of capping.

The effectiveness of this capping has important economic and environmental implications. Its purpose is:

  • to drain the methane gas which develops during the degradation of the waste
  • to prevent the infiltration of rainwater to stop contamination and the generation of excess pollutant leachate within the cell
  • to form a substrate suitable for the growth of natural vegetation
  • to be topographically compatible with the surrounding environment.


Meeting the challenge of erosion. Erosion is a problem that can arise at the closure of a landfill, after the construction of the final impermeable capping system. Ultimately, vegetation established on the capping system reintegrates the landfill into the environment. Erosion protection is often required to prevent damage from rainwater run-off, during the establishment of vegetation. 

As with base linings, careful selection of appropriate geosynthetic materials is needed.



Image

Optimising solutions through our experience and products


Our experience and wide range of products enables the optimisation of solutions for clients in accordance with current design and waste regulations; 

  • MacLine® GCL bentonite geocomposites 
  • MacDrain® drainage composites 
  • MacLine® geomembranes 
  • MacTex® H and F separation & filtering geotextiles 
  • MacTex® PN and PH protection geotextiles 
  • Paralink®, Paragrid®, MacGrid® WG soil reinforcement geogrids 
  • Paradrain® hybrid geogrid with integral drainage function.


Furthermore, drainage and hydraulic structures may also be required to control the water run-off, and limit the effects of erosion. 

Meeting the demands of construction and regulation. We draw upon our hydraulic, erosion protection and soil veneer stabilisation experience to meet the demands of modern landfill construction and to develop a harmonious and functional design in accordance with the current regulations.

Related products

ตาข่ายป้องกันการกัดเซาะชนิดรังผึ้ง ( MacWeb)
ตาข่ายป้องกันการกัดเซาะชนิดรังผึ่ง (Geocells) ประกอบด้วยช่องว่างเซลล์ที่นำมาวางเรียงกัน ผลิตด้วยการยึดแถบวัสดุสังเคราะห์ (มีทั้งเรียบผิวเรียบ, View
star
ตาข่ายเสริมกำลังชนิดรับแรงทิศทางเดียว
ส่วนใหญ่ตาข่ายเสริมกำลังมักใช้เพื่อวัตถุประสงค์ในการเสริมความแข็งแรงที่จำเป็นในการเสริมแรงและความสามารถในการจำกัดอนุภาคของดินที่อยู่ในช่องเปิดของกร View
star
ผ้าใบกันน้ํ้ำ
ผ้าใบกันน้ำเป็นวัสดุกันซึมเชิงประกอบที่ผลิตขึ้นโดยการเคลือบด้านใดด้านหนึ่งหรือทั้งสองด้านด้วยโพลีโอเลฟินชนิดถักทอ (โพลีโพรพีลีน, PP หรือโพลีเอทิลีน View
star
วัสดุสังเคราะห์แบบผสม
วัสดุสังเคราะห์แบบผสมเป็นการพัฒนาล่าสุดและเป็นนวัตกรรมที่สำคัญที่สุดในกลุ่มผลิตภัณฑ์ของวัสดุสังเคราะห์ แผ่นระบายน้ำใต้ดินสามารถใช้งานร่วมกับชั้นที่ View
star
วัสดุแผ่นใบป้องกันจากธรรมชาติ
วัสดุป้องกันจากธรมชาติ ทําจากเส้นใยตามธรรมชาติ เช่น ปอ, ฟางข้าว และเส้นใยพืช ถูกนำมาทำให้แบนและขึ้นรูปให้เป็นโครงสร้างรูปทรงตาข่ายแบบเปิดหรือถูกปิ View
star
แผ่นพลาสติกกันซึม
แผ่นพลาสติกกันซึมแบบพลาสโตเมอร์อยู่ในวัสดุจำพวกแผ่นพลาสติกกันซึมสังเคราะห์ มีจำหน่ายในแผ่นขนาดใหญ่ (5-8 มิลลิเมตร) แม้ว่ากระบวนการผลิตจะแตกต่างกันอ View
star
แผ่นใยดินเหนียวสังเคราะห์
วัสดุแผ่นดินเหนียวสังเคราะห์ (Geo-Clay-Liners ,GCL) เป็นวัสดุคอมโพสิตที่ผลิตเป็นชั้นแผ่นเบนโทไนต์ (โดยการใช้กรรมวิถีแบบเข็มถักทอ) ที่อยู่ระหว่างแผ่ View
star
แผ่นใยป้องกันการกัดเซาะ (MacMat)
 แผ่นใยป้องกันการกัดเซาะ (Geomats) ทําจากเส้นใยวัสดุสังเคราะห์ ซึ่งเส้นใยจะถูกให้ความร้อนและพันเข้าด้วยกันเพื่อสร้างขึ้นเป็นรูปแบบสามมิติ,ที่ม View
star
แผ่นใยป้องกันการกัดเซาะชนิดเสริมแรง (Macmat R)
แผ่นใยป้องกันการกัดเซาะชนิดเสริมแรง เป็นวัสดุคอมโพสิตรูปแบบใยสังเคราะห์ 3 มิติ ที่ถูกฝังลงไปในระบบเสริมแรงแบบลวดตาข่าย double twisted หรือตาข่ายเส้ View
star
แผ่นใยสังเคราะห์ชนิดไม่ถักทอ
แผ่นใยสังเคราะห์ชนิดไม่ถักทอเป็นแผ่นใยที่ประกอบขึ้นด้วยเส้นใยสังเคราะห์โดยผ่านการเจาะด้วยเข็มและ/หรือกระบวนการความร้อน วัสดุเหล่านี้ถูกนำมาใช้ในหลา View
star